Dell Perc 6i raid utility. This is a Dell T710 with Perc 6i. But the current version was available in the driver download section for a T710 just like I. Home » DELL PERC 6/i Integrated RAID Controller Use the links on this page to download the latest version of DELL PERC 6/i Integrated RAID Controller drivers. All drivers available for download have been scanned by antivirus program.

Hi, I'm trying to upgrade from windows server 2008 R2 to Windows Server 2012 R2 (64Bit) on a DELL 720r. When the upgrade starts (Boot from media or run setup from the server 2012 R2 media) I get the prompt to provide the mass storage device drivers. I need the files (on USB or DVD) that I can provide when setup prompts for mass storage drivers. Details of the pertinent hardware / drivers is below (windows 2008 R2). I've installed the latest firmware for anything that I can find for the Dell 710r and applied all dell and Microsoft (BIOS, Chipset, drivers for OS deployment, windowsupdate, etc.) software maintenance. I need the following drivers: • megasys,sys (perc 6/I); msicsi.sys (MSFT iscsi initiator) and iscilogic.dll (vers.

6.0.6002.18005) • The server is a Dell 710R running WindowServer 2008R2 with latest SP. (all is well - working).

Tetsujin 28 gou ps2 iso converter. The pertinent detail is: 'storage controller perc 6i scsi disk drive controller' • Dell perc 6/I integrated Raid controller (megasas.sys) • Microsoft iScsi initiator (Msicsi.sys) • iscilog.dll • File version 6.0.6002.18005. I've scoured the installation media for both the WindowsServer 2008R2 and WindowsServer 2012 R2 looking for drivers.

Please send me a link for the drivers or a KB telling me what to do. I can't find the drivers on any support sites (LSI, Dell, MSFT, etc) which work during upgrade. The mass storage device drivers.

Please point me to where to get the drivers (megasas.sys, msiscsi.sys) that will work during the upgrade process (Mass storage drivers) or a url that will help. Dell is telling me the drivers are on the windows installation media, but when I search various locations with no luck. Thank you in advance.. Hi Steve If the server model is a R720 (as I seen R710 in your post too), please go there to get the driver for your controller. ( Restart your server, and validate the controller #, as it will show a windows in the booting. It can be: or After you unzip those file on a USB stick, and after you can supply it to the setup. Regards, Philippe Don't forget to mark as answer or vote as helpful to help identify good information.

( linkedin endorsement never hurt too:o) ) Answer an interesting quest ion? Create a about it! Hi Steve If the server model is a R720 (as I seen R710 in your post too), please go there to get the driver for your controller. ( Restart your server, and validate the controller #, as it will show a windows in the booting. It can be: or After you unzip those file on a USB stick, and after you can supply it to the setup.

Regards, Philippe Don't forget to mark as answer or vote as helpful to help identify good information. ( linkedin endorsement never hurt too:o) ) Answer an interesting quest ion? Create a about it!

We've recently had to migrate from the Dell 1950 to the Dell R610 since Dell isn't making/selling the 19xx series any longer. The operating system we use is Windows XP Embedded, and to get a solid build it's necessary to have a Windows XP install on the hardware you're targeting. However, I cannot get the Windows XP install disc to recognize the hard drives on the R610 (which uses PERC 6/i integrated). Things I've tried: + PERC5/6 driver disk we used to get Windows XP on the 1950's. + Multi-device PERC driver from dell for servers (percsas rather than megasas) + LSI driver for MegaRAID 8048 (despite saying it's for XP on the website it shows up as a Vista driver on the F6 select screen) + The actual controller cards on the 1950 and R610 appear to be identical - I swapped them, but it didn't affect anything. + Install Server 2003, scan that configuration and then manually re-write the inf files for the XP versions - this blue-screened the XP Embedded install (although it did get to the loading Windows screen!). + Formatted the hard disk (came completely un-formatted) + Installed XP on the drive from a 1950 and swapped the HD into the R610 (obviously didn't work) If I can get the XP installation disc to recognize the drive, I'm good to go from there but I have been unable to locate a driver that works.

Dell doesn't support XP on the R610, so they don't have a driver for download and LSI's latest driver comes up as Vista despite being from their Windows XP link - does anyone know of a driver that will work to get XP running on an R610? Camel heat load calculation software. I used the driver mentioned above (after 5 hrs of trying what DELL and Microsoft suggested) with a new PE T310. However I also started with the DELL USC - SELECT PLATFORM UPDATE WIZARD and the and the SYSTEM MANAGEMENT and TOOLS disk (so you don't need to get the update from the FTP server.