• WL-5460AP 54Mbps Multi-Function Wireless AP User’s Manual AirLive WL-5460AP v2 User Manual. • OvisLink Corp. Windows ™ 95/98 and Windows ™ 2000 are trademarks of Microsoft ® Corp. Pentium is trademark of Intel.

Mar 11, 2014 - The WL-5450AP and WL-5460AP uses different firmwares. Please do not use the wrong firmware (i.e. Do not use WL-5460AP firmware on. AirLive Wireless AP Firmware Features Firmware e11: The Most Powerful AP Firmware Ever! WL-5460AP As the leading global WISP solution provider, AirLive understands the application environments of WISP operators. As a result, we are constantly upgrading our AP’s firmware to meet the changing demand of WISP operators.

All copyright reserved. Pc dialer software download. AirLive WL-5460AP v2 User Manual. System Management..64 4.1 LAN Interface Setup..64 4.2 Upgrade Firmware..65 4.3 Save / Reload Settings.66 4.4 Change Password..67 4.5 Enable System Log..68 4.6 NTP Settings..69 5. System Recovery..70 6.

Specification..71 AirLive WL-5460AP v2 User Manual. Introduction 1.1 Overview AirLive WL-5460AP is an IEEE802.11b/g compliant 11 Mbps & 54 Mbps Ethernet Wireless Access Point. The Wireless Access Point is equipped with two 10/100 M Auto-sensing Ethernet ports for connecting to LAN and also for cascading to next Wireless Access Point. • Application Example 1 Example 2 AirLive WL-5460AP v2 User Manual. • AirLive’s high quality hardware let the AP expand its RF output power up to 26dBm using South American firmware. That’s 4 times the output power of regular AP! It means much greater distance and coverage.

AirLive WL-5460AP v2 User Manual. • At last, the installer simply clicks on “connect” button establish connection. The site survey is available even in AP mode, so the install er can heck the channels used by surrounding APs to avoid interferences. AirLive WL-5460AP v2 User Manual. • WL-54 60AP. Finally, this section explains how to configure a Windows PC to communicate with the WL-5460AP.1 ackage Content W 5460AP package contains the. • Lights on when MAC control is enabled.

MAC Ctrl Green Bridge / Green Lights on when Bridge or Repeater is enabled Repeater LAN1 Green Lights on when the port is actively connected, blinking when transmitting or receiving data. LAN2 Green AirLive WL-5460AP v2 User Manual. • LAN port 2 or WAN port(Gateway Mode only) Press over 3 seconds to reboot this device. (Factory) Reset Press for over 10 seconds to restore factory settings. Performing the Factory Reset will erase all previously entered device settings.

AirLive WL-5460AP v2 User Manual. • 1.3.3 Configuration Setups The factory default settings of WL-5460AP are as following: Settings Default Value Device Name WL-5460AP Radio 802.11b/g SSID airlive Channel Disabled IP Address 192.168.100.252 DHCP Server Disabled. Available and default enabled when each of the wireless is configured as a gateway. • 1 Please make sure your computer IP is in the same subnet as the AP (i.e. 2 Please make sure your computer has wireless network adapter installed. 3 Open the web browser and enter AirLive WL-5460AP v2 User Manual.

Operation Mode The WL-5460AP device provides all 8 modes of wireless operational applications with: Mode Radio LAN 1 LAN 2 Client Client Bridge WDS Repeater WDS + AP Universal Repeater AP + Client WISP Client Router WISP + Universal. • 2.1 Change Operation Mode WL-5460AP is default in AP mode. If the mode had been changed, click the “Mode” button to change back.

To change operation Mode: 1. Click on “Mode“ 2. Select Operation Mode in the main page 3. Pftrack 2017.

Reboot device 4. • All stations can have the Internet access if only the Access Point has the Internet connection. See the sample application below. To set the operation mode to Access Point, please go to “Mode” field and select the “AP” mode. AirLive WL-5460AP v2 User Manual. • AirLive WL-5460AP v2 User Manual. • Access Point (AP2), and then can have the Internet access if the other Access Point (AP2) has the Internet connection.

To set the operation mode to Client (Infrastructure), please go to “Mode＂field and select the “Client” mode. AirLive WL-5460AP v2 User Manual. • To set the operation mode to Client (Infrastructure), please go to “Mode” field and select the “Bridge” mode. AirLive WL-5460AP v2 User Manual. • Station 1 and Station 2 are able to access the Internet if only AP1 or AP2 has the Internet connection. To set the operation mode to Client (Infrastructure), please go to “Mode” field and select the “WDS Repeater” mode. AirLive WL-5460AP v2 User Manual.

• Therefore, it can work with almost any wireless device. To set the operation mode to Client (Infrastructure), please go to “Mode” field and select the “Universal Repeater” mode. AirLive WL-5460AP v2 User Manual.